Linux version 2.2.12-20 (root@honspc14.csse.monash.edu.au) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #5 Wed Sep 13 09:23:57 EST 2000
Detected 551259119 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 550.50 BogoMIPS
Memory: 128224k/131072k available (816k kernel code, 416k reserved, 1560k data, 56k init)
DENTRY hash table entries: 262144 (order: 9, 2097152 bytes)
Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
VFS: Diskquotas version dquot_6.4.0 initialized
Pentium-III serial number disabled.
CPU: Intel Pentium III (Katmai) stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfb420
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Starting kswapd v 1.5 
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.9)
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DJNA-370910, ATA DISK drive
hdc: CD-ROM 40X/AKU, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: IBM-DJNA-370910, 8693MB w/1966kB Cache, CHS=1108/255/63, UDMA
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
   pII_mmx   :  1227.201 MB/sec
   p5_mmx    :  1288.923 MB/sec
   8regs     :   946.404 MB/sec
   32regs    :   530.733 MB/sec
using fastest function: p5_mmx (1288.923 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 >
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 56k freed
Adding Swap: 265032k swap-space (priority -1)
ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x9400, IRQ 11.
eth0: RealTek RTL-8029 found at 0x9400, IRQ 11, 00:50:BA:AA:B3:74.
i2c: initialized
Linux video capture interface: v1.00
bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 104, irq: 10, memory: 0xea000000.
bttv: 1 Bt8xx card(s) found.
bttv0: PLL: 28636363 => 35468950 ... ok
bttv0: NO fader chip: TEA6300
bttv0: model: BT878