|
This page lists the known defects with PASE 4 and the current solutions to them.
General SQL Error on creating a project
Defect: In some installations of Windows, the DAO has not been correctly updated. If this is the case, then you will get the following error screen:
Solution: To solve this problem, download the DAO patch file (JET35SP3.exe) from the web site and run it. This should fix the problem. If this doesn't work, check that the file you downloaded is pase4.zip - 8,206KB - 1/08/2001 - 12.14pm or later.
Function Point Count Data not retained
Problem: The system while retaining the calculated number of function points doesn't retain the data which was used to cmake that calculation and it must therefore be completely re-entered each time that you wish to re-calculate the function points for a stage.
Solution: No solution at this time, the data must be re-entered. The next version of PASE will address this defect.
Non-Productive Time field reads 99:__
Problem: When adding a time, the non-productive time field shows 99:__ as the edit mask when the field is selected.
Solution: Ignore the edit mask, if you tab through it will revert to 00:00 or you may edit it normally without effect. It appears to be a problem with the edit mask function of the text field component in C++ Builder 5.
Crashing when Printing or Print Previewing
Problem: PASE crashes when you go to Print or Print Preview.
Solution: You haven't selected a printer for PASE to use or you have a network printer as your default printer and the network is unavailable. Go to Printer Setup and select a printer.
Despite our best efforts, we are unable to catch the exception which causes the crash. We will try and fix this in the next version of PASE, if not sooner.
|
